Nonwoven Geotextiles
Needle-punched and thermally bonded nonwoven geotextiles for filtration, separation, drainage, and protection applications. Our nonwoven grades meet DOT specifications for highway and municipal projects nationwide.
Commonly used in subsurface drainage systems, retaining wall backfill, pavement edge drains, and erosion control applications where water must pass through while soil particles are retained.
Typical Specifications
| Weight range | 2 oz/yd² – 16 oz/yd² |
| Grab tensile strength | 90 – 300+ lbs |
| Puncture resistance | 40 – 120+ lbs |
| Permittivity | 0.05 – 2.0 sec⁻¹ |
| AOS (apparent opening size) | US #20 – #100 sieve |
| Common roll widths | 12.5 ft, 15 ft, 17.5 ft |
Request a Quote
Woven Geotextiles
High-tensile woven polypropylene geotextiles for subgrade reinforcement, road stabilization, and load distribution. Woven fabrics provide the strength needed for challenging site conditions where soft subgrades require mechanical improvement.
Ideal for unpaved road construction, parking lot base reinforcement, embankment stabilization, and separation of subgrade soils from aggregate base layers.
Typical Specifications
| Weight range | 4 oz/yd² – 12 oz/yd² |
| Tensile strength (MD) | 200 – 800+ lbs/ft |
| Elongation at break | 15% – 25% |
| CBR puncture | 500 – 1,500+ lbs |
| UV resistance | 70% retained @ 500 hrs |
| Common roll widths | 12.5 ft, 15 ft, 17.5 ft |
Request a Quote
Landscape Fabric
Woven polypropylene weed-barrier fabric that blocks weed growth while letting water and air reach the soil below. Built for long-term outdoor exposure under mulch, gravel, and hardscape installations.
Commonly used under mulch beds, gravel walkways and patios, paver base preparation, and residential or commercial landscape beds where long-lasting weed suppression is required.
Typical Specifications
| Weight range | 2.7 oz/yd² – 6 oz/yd² |
| Construction | Woven, UV-stabilized polypropylene |
| Water flow-through | High permeability |
| UV resistance | Rated for extended outdoor exposure |
| Common roll widths | 3 ft, 4 ft, 6 ft, 10 ft, 12 ft, 15 ft |
| Common roll length | 300 ft |
Request a Quote
Silt Fence
Woven polypropylene sediment control fabric that slows stormwater runoff and traps sediment on-site, helping projects meet state DOT requirements.
DOT-approved and available in orange or black, as master rolls or cut down to the length you need. Used around site perimeters, stockpiles, and disturbed slopes.
Typical Specifications
| Fabric weight | 47 GSM – 100 GSM |
| Grab tensile strength | 100 – 130+ lbs |
| Fence height | 36 in, 42 in |
| Colors | Orange, black |
| Roll form | Master rolls or cut-down rolls |
| Compliance | DOT-approved, NPDES/SWPPP erosion control |
Request a Quote
Sandbags
Woven polypropylene sandbags for flood control, erosion control, ballast, and construction site staging. UV-stabilized for reliable outdoor performance.
Sold empty, ready to fill on-site. Tie strings included for a secure closure once filled.
Typical Specifications
| Bag size | 14 in x 26 in |
| Fabric weight | 61 GSM |
| UV resistance | 1,600+ hours |
| Closure | Tie strings included |
| Colors | Orange, white |
| Fill | Sold empty |
Request a Quote
